Control Box
User Manual 67
The accessories listed here below are described for information purposes only,
and are not necessarily included in the packaging. The minimum contents of the
packaging include the main hardware, cables and keys. For additional informa-
tion, please see
"Contents of the packaging" on page 4.
Control Box
This accessory is used to control the laser marker through the Control Box inter-
face.
The Control Box allows to perform the following functions:
• Changing laser marker state
• Starting and Stopping th
e marking process
• Showing the marking process state
• Showing the system error state
Figure 1: Control Box (ordering no: 985330031).
NOTE
See "Command Box (Laser Control)" on page 28 for detailed control signal descrip-
tion.
Remote Start Foot Switch
This accessory is used to provide the
START_MARKING
signal to the laser marker
when the pedal is pressed by the operator.
Figure 2: Remote Start Foot Switch (ordering no: 985350035)
NOTE
Refer to Remote Start Foot Switch instruction manual for more information.
To Next Page
Loading...