Customize the laser marker software
60
Arex™ 400
Change the LAN configuration and IP address
The operating system allows you to change the LAN configuration and IP
address.
NOTE
In order to perform this setting it is necessary to connect mouse, keyboard and monitor
to the laser marker (see "
Local Mode Control connections" on page 48).
1. Turn OFF and ON the laser marker wait until booting-up finishes (the status
LED on the control rack and on the scan head must be steady green)
2. From the main window click on Sta
rt > Control Panel
3. Select View network status and task:
To Next Page
Loading...