CE Compliance
User Manual ix
CE Compliance
CE marking states the compliance of the product with essential requirements
listed in the applicable European directive. Since the directives and applicable
standards are subject to continuous updates, and since Datalogic promptly
adopts these updates, therefore the EU declaration of conformity is a living doc-
ument. The EU declaration of conformity is available for competent authorities
a
nd customers through Datalogic commercial reference contacts. Since April
20th, 2016 the main European directives applicable to Datalogic products
require inclusion of an adequate analysis and assessment of the risk(s). This
evaluation was carried out in relation to the applicable points of the standards
listed in the Declaration of Conformity. Datalogic products are mainly designed
for integration purposes into more complex systems. For this reason it is under
the responsibility of the customer to do a new risk assessment regarding the
final installation.
W
ARNING
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
FCC Compliance
Modifications or changes to this equipment without the expressed written
approval of Datalogic could void the permission to use the equipment.
This laser marker complies with PART 15 of th
e FCC Rules. Operation is subject
to the following two conditions: (1) this laser marker may not cause harmful
interference, and (2) this laser marker must accept any interference received,
including interference which may cause undesired operation.
This laser marker has been tested a
nd found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equip-
ment is operated in a commercial enviro
nment. This laser marker generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this laser marker in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his/her own expense.
EAC Compliance
Customs Union: this laser marker complies with CU Conformity certification; this
allows the Product to bear the Eurasian Mark of conformity.
To Next Page
Loading...