Customize the laser marker software
62
Arex™ 400
7. In the Internet Protocol Version 4 (TCP/IPv4) Properties you can change the
IP address and configuration:
8. Close all the open windows and double click on shortcut to save-data.bat
icon in the Desktop window.
9. A message advises you to restart or shutdown the operating system in
order to permanently save data. Press OK:
10. Shut down the operating system in order to save the new settings:
W
ARNING
DO NOT turn OFF or UNPLUG the laser marker while Windows® is shutting down.
11.WAIT until operating system shuts down automatically (black screen)
12.Power off the laser marker to complete installation
To Next Page
Loading...