Datalogic MAGELLAN 3200VSI - Disable;Enable EAN-8; Check Digit Transmission; Expand EAN-8 to EAN-13

Enter/Exit Programming Mode EAN-8
94 Magellan™ 3200VSI
EAN-8
The following options apply to the EAN-8 symbology.
Disable/Enable EAN-8
When disabled, the scanner will not read EAN-8 bar codes.
Disable EAN-8
Enable EAN-8
DEFAULT
Check Digit Transmission
Enable this option to transmit the check Digit along with EAN-8 bar code data.
Don’t Send Check Digit
Send Check Digit
DEFAULT
Expand EAN-8 to EAN-13
Expands EAN-8 data to the EAN-13 data format. Selecting this feature also
changes the symbology ID to match those required for EAN-13.
Don’t Expand to EAN-13
DEFAULT
Expand to EAN-13