Datalogic MAGELLAN 3200VSI - Image Compression; Product Reference Guide I; Image Format

Enter/Exit Programming Mode
Product Reference Guide 35
Image Compression
Specifies the starting image compression factor for JPEG images. A higher num-
ber specifies a higher quality image with less compression than a relative lower
n
umber for the same image.
A value of 100 means minimal compression. A value of 1 means maximum
co
mpression at a loss of quality. Follow these steps to program this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan the Set Image Compression bar code.
3. Turn to and scan the two digits (zero-padded) representing th
e desired
compression. The configurable range is 01-0x64 by increments of 01.
4. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
Set Image Compression
DEFAULT SETTING IS
100 (minimal compression — higher quality)
Image Format
Specifies the format of the captured image
Image Format = JPG
DEFAULT
Image Format = BMP