Product Reference Guide 33
Image Capture
Image Capture
How to Capture an Image
There are two methods of capturing images as discussed below:
• "Image Capture to a microSD
Card by Scanning a Special Label"Image Cap-
ture to a microSD Card by Scanni
ng a Special Label on page 33
• "Image Capture to the Ho
st by Host Command"Image Capture to the Host
by Host Command on page 34
Image Capture to a microSD Card by Scanning a Special Label
Insert a microSD card into the scanner, scan a capture label and place the item
to be captured in front of the scanner. Press and release the Camera Button.
The image will be written to the microSD card five seconds after button release.
The format, size, contrast, brightness and compression use the configured val-
ues.
This Capture label is as follows:
<FNC3>IMAGEFAUTO<CR>
NOTE
The Capture label will not read unless a microSD card is inserted.
The image filename is automatically increased from image000 to image999.
The date image file generated is not actual, since no real time clock is embed-
ded in the scanner.
To Next Page
Loading...
