Datalogic MAGELLAN 3200VSI

RS-232 Interface Features Enter/Exit Programming Mode
Product Reference Guide 53
ACK NAK Options
This enables/disables the ability of the scanner to support the RS-232 ACK/
NAK protocol. When configured, the scanner and/or host sends an “ACK” when
it receives data properly, and sends “NAK” when the data is in error. Selections
for this option are:
•Disable
• Enable for label transmission — the scanner expects an ACK/NAK
r
esponse from the host when a label is sent
• Enable for host-command acknowledge — the scanner will respond with
ACK/NAK when the host send
s a command
• Enable for label transmission an
d host-command acknowledge
Disable ACK NAK
DEFAULT
Enable ACK NAK for Transmission
Enable ACK NAK for host command acknowledge
Enable ACK NAK for transmission and host command