RS-232 Interface Features Enter/Exit Programming Mode
Product Reference Guide
47
Intercharacter Delay
This delay is inserted after each data character transmitted. If the transmission
speed is too high, the system may not be able to receive all characters. You may
need to adjust the delay to make the system work properly.
Interchar Delay = No Delay
DEFAULT
Interchar Delay = 10 msec
Interchar Delay = 20 msec
Interchar Delay = 30 msec
Interchar Delay = 40 msec
Interchar Delay = 50 msec
Interchar Delay = 60 msec
Interchar Delay = 70 msec
To Next Page
Loading...
