USB Keyboard Enter/Exit Programming Mode
Product Reference Guide
69
Control Characters
Specifies how the scanner transmits ASCII control characters to the host.
Choices are:
• Disable Control Characters
• Enable transmission of control cha
racters to host
• Send characters between 00H and 1FH ac
cording to a special function-key
mapping table. (This is used to send keys that are not in the normal ASCII
set; a unique set is provided for each available scancode set. Reference
Appendix E, Keyboard Function Key Mappings.)
Disable Control Characters
DEFAULT
Enable Transmission of Control Characters
Enable Function Key Mapping
To Next Page
Loading...
