Interleaved 2 of 5 Enter/Exit Programming Mode
Product Reference Guide
113
Interleaved 2 of 5 Length Control
Fixed Length Decoding — When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding — When variable length decoding is enabled, the scan-
ner will decode a bar code if the label length falls in the range of the configu-
rable Length 1 and Length 2 values.
Variable Length Decoding
DEFAULT
Fixed Length Decoding
Interleaved 2 of 5 Length 1, Length 2 Programming Instructions
See Length 1, Length 2 Programming Instructions on page 148 for detailed
instructions on setting this feature
.
NOTE
DEFAULT SETTING FOR THIS FEATURE: 06
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 50
For Interleaved 2 of 5 bar codes, lengths must be an even number. Addi-
tionally, all check and data characters are
included in the length calcula-
tions.
To Next Page
Loading...
