Datalogic MAGELLAN 3200VSI - Microsd Function Summary; Microsd Function Details; From Scanner to Microsd Card; Capture and Save an Image to a Microsd Card by Scanning a Label

Product Reference Guide 181
microSD Function Summary
The following table summarizes various functions of microSD card.
FUNCTION
Image
Capture
Export
Status
Export
Configurati
on
Load
Applic
Load
Config
Load
CPLD
Code
Feature
Upgrad
e*
Direction
Scanner 
microSD Card
  
microSD Card 
Scanner
   
Initiated by
Scanning a label
 
AUTORUN.DLS file
in microSD card
     
* Contact tech support for any available feature upgrade license.
microSD Function Details
From Scanner to microSD Card
Capture and save an image to a microSD card by scanning a label.
1. Insert the microSD card into the scanner
2. Scan the Capture Label
The scanner enters image capture mode.
3. Place the item to be captured in front of the scanner.
Press and release the Camera Button. The sc
anner will automatically cap-
ture and save the image to the microSD card.
4. Upon scanner audio indication of completion, an image is saved to the
microS
D card.
NOTE
The image file name range is from IMAGE000 to IMAGE999. if the
same name already exists in the microSD card, the scanner skips that
name and uses the next. For example, if IMAGE000.JPG is already used
in the microSD card, the scanner uses IMAGE001.JPG. The time stamp
is not real, since scanner does not have a real time clock.
Image format (.BMP, .JPG), image size (VGA
, WVGA, Full size), Bright-
ness (0~9), contrast (0~9), and JPG compression
ratio (0~100) are
defined in configuration.