Datalogic MAGELLAN 3200VSI - Host Echo Quiet Interval

Enter/Exit Programming Mode
50 Magellan™ 3200VSI
Host Echo Quiet Interval
This setting specifies the time interval of RS-232 channel inactivity which must
transpire before the scanner will break the host echo loop to transmit the bar
code data that has just been scanned to the host.
Host Echo Quiet Interval = 0msec
Host Echo Quiet Interval = 10msec
DEFAULT
Host Echo Quiet Interval = 20msec
Host Echo Quiet Interval = 30msec
Host Echo Quiet Interval = 40msec
Host Echo Quiet Interval = 50msec
Host Echo Quiet Interval = 60msec
Host Echo Quiet Interval = 70msec