Datalogic MAGELLAN 3200VSI - GS1 Databar Expanded Length Control; GS1 Databar Expanded Length 1, Length 2 Programming Instructions

GS1 DataBar Expanded / Expanded Stacked Enter/Exit Programming Mode
Product Reference Guide 101
GS1 DataBar Expanded Length Control
Fixed Length Decoding — When fixed length decoding is enabled, the scanner
will decode a bar code if the label length matches one of the configurable fixed
lengths.
Variable Length Decoding — When variable length decoding is enabled, the scan-
ner will decode a bar code if the label length falls in the range of the configu-
rable Length 1 and Length 2 values.
Variable Length Decoding
DEFAULT
Fixed Length Decoding
GS1 DataBar Expanded Length 1, Length 2 Programming Instructions
See Length 1, Length 2 Programming Instructions on page 148 for detailed
instructions on setting this feature.
NOTE
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 1
Set Length 2
³
DEFAULT SETTING FOR THIS FEATURE: 74
For GS1 DataBar Expanded bar codes, only the data characters are
included in the length calculations.