Datalogic MAGELLAN 3200VSI - Good Read: When to Indicate

Enter/Exit Programming Mode
Product Reference Guide 27
Good Read: When to Indicate
This feature specifies when the scanner will provide indication (beep and/or
flash its green LED) upon successfully reading a bar code. Choices are:
• Good Read = Indicate after decode
• Good Read = Indicate after transmit
• Good Read = Indicate after CTS
goes inactive, then activ
NOTE
This option (Indicate after CTS goes inactive, then active), which uses CTS,
is
only valid for RS-232 interfaces.
e
After Decode
DEFAULT
³
After Transmit
After CTS goes inactive, then active