Datalogic MAGELLAN 3200VSI

182 Magellan™ 3200VSI
Export a Configuration file from the Scanner to the microSD card
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTO-
RUN.DLS.
$START$
DUMPCFG,SDCONFIG.TEX (Fi
lename can be anything, for example “SOME-
THING.TEX”)
$END$
2. Save or copy file AUTORUN.DLS to microSD card
3. Insert the microSD card to scanner
4. Wait for 3 seconds,
A scanner configuration file named SDCONFIG.TXT is saved to the microSD
ca
rd.
Export Scanner Status to microSD card
The data includes scanner ID, statistics and scanner health.
By scanning a label
1. Insert the microSD card into the scanner
2. Scan the status export label
<FNC3>STATUS<CR>
3. Upon scanner audio indication of completion, the scanner status text file
na
med STATUS.TXT is saved to the microSD card.
By AUTORUN.DLS file
1. Generate a text file by any text editor as follows and save it as AUTO-
RUN.DLS
$START$
DUMPSTATS,DMPSTATS.TXT
$END$
2. Save or copy the AUTORUN.DLS file to the microSD card
3. Insert the microSD card into the scanner
4. Wait for about 3 seconds.