Datalogic MAGELLAN 3200VSI

Product Reference Guide 189
EAN-13 with Code 128 Supplemental
• Check digit must be included in label data and is assumed to be correct
• Supplemental data is appended to base label
• Prefix must be an ASCII character 'F'- total length including prefix must be
greater or equal to 20 (code 128 Supplemental codes are variable length
having a minimum of 2 data characters)
• Characters immediately following base label must be of the form '8100',
'8101' or '8102'
• Example: 'F11012345678918100000951'
Code 39
• Check character must be included in label data.
• Label length including start, stop and check characters and excluding pre-
fix character must meet requirements imposed by the main scanner's fixed
or variable label length control for this symbology type.
• Start and stop characters "*" must be included in label.
• Prefix must be an ASCII character '*'.
• Example : '**Code 39.TEST*'.
Code 39-Pharmacode
• Check character must be included in label data.
• Label length including start, stop and check characters and excluding pre-
fix character must meet requirements imposed by the main scanner's fixed
or variable label length control for this symbology type.
• Start and stop characters "*" must be included in label.
• Prefix must be an ASCII character 'p'.
• Example: 'p*123456789*'.
I 2 of 5
• Check character must be included in label data.
• Label length including check characters and excluding prefix character
must meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be an ASCII character 'i'.
• Example: 'i0123456789'.