194 Magellan™ 3200VSI
Code 128 Supplemental
• Supplemental data is appended to any EAN base label.
• Prefix must be ASCII characters ']C0'.
• length of Supplemental data including prefix is variable but must be at
least 9.
• Examples: addon portion is high
lighted data is underlined.
UPC-A Code 128 addon
']E00060992011187
]C08100000
951
'
UPC-E Code 128 addon
'E00000000998875
]C081000009
51
'
EAN-8 Code 128 addon
']E400210126
]C08100000951
'
EAN-13 Code 128 addon
']E01101234567891
]C08100000
951
'
Bookland
• The 'Bookland' / ISBN code will be formatted as a vendor specific AIM label.
• Prefix must be ASCII characters ']X0'.
• length of label data including prefix is 13.
• Examples: ']X01234567890'.
Code 39
• Check character must be included in label data.
• Label length including start, stop and check characters and excluding pre-
fix characters must meet requirements imposed by the main scanner's
fixed o
r variable label length control for this symbology type.
• Start and stop characters "*"
must be included in label.
•Prefix must be ASCII characters ']A0'
or ']A1'.
• Example: '*]A0Code 39.TEST*'.
Codabar
• Check character must be included in label data.
• Label length including check character and excluding prefix characters
mu
st meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be ASCII characters ']F0'.
• Start stop character sets must meet the matching requirement set forth by
th
e scanner configuration item
Start/Stop Character Match.
• Start stop character sets s must be of the form
ABCD/ABCD and must be
included in the label.
• Example: ']F0s$99.95s' (the lo
wer case ‘s’ at each end of the example is a
placeholder for the start stop character set).
To Next Page
Loading...
