Product Reference Guide 195
MSI
• Check character must be included in label data.
• Label length including check character and excluding prefix characters
must meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be ASCII characters ']M0'.
• Example: ']M0144769254'.
Code 93
• Prefix must be ASCII characters ']G0'.
• Label length excluding prefix characters must meet requirements imposed
by the main scanner's fixed or variable label length control for this sym
-
bology type.
•Example : ']G0Code93-test'.
RSS-14
• Prefix must be ASCII characters ']e0'.
• Check character must be included in label.
• Label length excluding prefix characters must be 14 characters.
• Example: ']e001044123456789'.
RSS Expanded
• Prefix must be ASCII characters ']e0'.
• Label length excluding prefix characters must be at least 1 character.
Maximum length is the maximum label size supported by the scanner.
• Example: ']e001900123456789083103001750'.
I 2 of 5
• Check character must be included in label data.
• Label length including check characters and excluding prefix characters
must meet requirements imposed by the main scanner's fixed or variable
label length control for this symbology type.
• Prefix must be an ASCII character ']I1' (other prefixes specify different
check character properties which are not supported).
• Example: ']I10123456789'.
Code 128 / EAN128
• Prefix must be either ASCII characters ']C0', ']C1' or ']C2'.
• Label length excluding prefix character must meet requirements imposed
by the main scanner's fixed or variable label length control for this sym
-
bology type.
• If EAN-128 Symbology is Enabled and prefix is ']C1', label will be identi-
fied as an EAN128 otherwise it is identified as a Code 128.
• A prefix of ']C0' designates that no function code is present in the 1st or
2nd character position.
• A prefix of ']C2' designates that a function code 1 is present in the 2nd
character.
• Example : ']C0Code_128.Test'.
To Next Page
Loading...
