Enter/Exit Programming Mode
Product Reference Guide
37
Image Brightness
This feature sets the image brightness value. Follow these instructions to con-
figure this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan the Set Image Brightness bar code.
3. Turn to and scan the two digits (zero-padded) representing th
e desired
brightness in decimal notation. The co
nfigurable range is 01-0x0A by
increments of 01.
4. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
Set Image Brightness
DEFAULT SETTING FOR THIS FEATURE: 09
Image Contrast
This feature sets the image contrast value. Follow these instructions to config-
ure this feature:
1. Scan the Enter/Exit Progr
amming Mode bar code.
2. Scan the Set Image Contrast bar code.
3. Turn to and scan the two digits (zero-padded) representing th
e desired
contrast in decimal notation. The configurable range is 01-0x0A by incre-
ments of 01.
4. Complete the programming sequence by
scanning the Enter/Exit Pro-
gramming Mode bar code.
Set Image Contrast
DEFAULT SETTING FOR THIS FEATURE: 09
To Next Page
Loading...
