102 PowerScan
®
RF Scanner
If you select fixed length format, there are three bar code labels for pro-
gramming your scanner to read either one or two fixed lengths. The
labels are:
Set First Fixed Length - instructs the scanner that the next two
programming labels scanned will define the first fixed label
length. This setting must be between 03 and 50
1
characters.
Set Second Fixed Length - instructs the scanner that the next
two programming labels scanned will define the second fixed
label length. This setting must be between 03 and 50
1
characters.
No Second Fixed Length - configures the scanner to recognize
only the first fixed length.
1. For this symbology, the scanner will decode up to 50 characters, but the actual length read will
vary depending upon the interface type, and bar code physical size and quality.
To Next Page
Loading...
