Datalogic PowerScan RF Programming Guide

176 PowerScan
®
RF Scanner
Set Maximum
Linked
Scanners
By default, as many as eight scanners can be linked to one Base Station.
This feature allows you to further limit allowable linked scanners. Des-
ignate a number of scanners that can link from one to eight.
Feature is specific to Base Station ONLY
NOTE
Remember, programming changes to the Base Sta-
tion have no effect until the new configuration is
downloaded via the feature Transmit Scanner Con-
figuration to Base Station on page 11.
SET ------------------------------
Maximum Linked
Scanners = 1 ---------
Maximum Linked
Scanners = 2 ---------
Maximum Linked
Scanners = 3 ---------
Maximum Linked
Scanners = 4 ---------

Datalogic PowerScan RF Specifications

General

Brand	Datalogic
Model	PowerScan RF
Category	Barcode Reader
Language	English