42 PowerScan
®
RF Scanner
Keyboard Wedge Options
Connect to a
Laptop/No
Keyboard
Attached
If no keyboard is attached, the scanner must provide the acknowledge
signal to the PC. In this case, enable the "Laptop/No External Key-
board" mode. If a keyboard is attached, enable "Keyboard Attached."
Laptop (integrated keyboard) — provides the acknowledge signal to
the PC when the scanner is connected to a laptop computer or when
the scanner is operated with no external keyboard.
PC (external keyboard) — is enabled when the scanner is connected to
a standard PC.
Send Control Characters — transmits all ASCII characters except NUL
(00h) . Disabling this feature limits transmission of ASCII characters to
the following:
• Only ASCII characters between 20h and 127h, plus.
— Carriage Return (CR=0Dh)
— BackSpace (BS=08h)
— Right Tab (HT=09h)
—Left Tab (0Bh)
—Esc (1Bh)
Keyboard Wedge options are specific to Base Station ONLY
To Next Page
Loading...
Need help?
General
