174 PowerScan
®
RF Scanner
Common
Configuration
When this option is enabled, the Base Station attempts to share its con-
figuration with a scanner as that scanner links to the Base Station. If,
during linking, a scanner’s configuration file does not match the Base
Station’s current settings, the Base Station attempts to transmit to the
scanner and overwrite the configuration file with its own.
Feature is applicable to scanner and Base Station.
NOTE
Remember, programming changes to the Base Station
have no effect until the new configuration is downloaded
via the feature Transmit Scanner Configuration to Base
Station on page 11.
NOTE
Since a new/replacement scanner may have been
shipped with a custom configuration or may have been
modified with other special programming, it may not be
desirable to download a potentially older configuration
from an existing Base Station. Reference Transmit Scan-
ner Configuration to Base Station on page 11 for more
information.