RF Programming Manual 133
Set Second Fixed Length — instructs the scanner that the next
two programming labels scanned will define the second fixed
label length. This setting must be between 01 and 50
1
characters.
No Second Fixed Length — configures the scanner to recog-
nize only the first fixed length.
Read
Verification
Read Verification is the number of times the scanner is required to read
the bar code data before sending the label data to the host.
1. For this symbology, the scanner will decode up to 50 characters, but the actual length read will
vary depending upon the interface type, and bar code physical size and quality.
To Next Page
Loading...
Need help?
General
