Datalogic PowerScan RF - MSI;Plessey; UPC-A; UPC-A with 2 digit Add-on; UPC-A with 5 digit Add-on

78 PowerScan
®
RF Scanner
Enable Code 93 ---------
Enable
Standard 2 of 5 ---------
Enable IATA
a
---------
a. Standard 2 of 5 must first be enabled for IATA to be active, however, when
IATA is enabled, Standard 2 of 5 will not be decoded.
Enable MSI/
Plessey ---------
END ------------------------------
Transmit Scanner
Configuration to
Base Station ---------