Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
50 Class Series 2 Programmer’s Manual
<STX>Kc
Parameter Name
Parameter
Pneumonic
Value /
Range
Units /
Interpretation
Menu Item (or Number)
(if available)
Command
Equivalent
GPIO Error Pause
GP
E, D
E = Enabled,
D = Disabled
Printer Options N/A
GPIO Slew
GS
0 – 4
0 = Standard,
1 = Low Pulse,
2 = High Pulse,
3 = Active Low,
4 = Active High
Printer Options N/A
Head Bias
HB
L, R
L = Leftmost dot is
zero,
R = Rightmost dot is
zero
System Settings N/A
Head Cleaning
HC
0 – 9999
Inches (or
centimeters)
multiplied by 1000
Media Settings N/A
Heat
HE
0 – 30 N/A
Print Control (21)
Hnn
Host Timeout
HT
1 – 60 Seconds Communications N/A
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz