Datamax E-Class Mark II Programmer's Manual

System-Level Command Functions
32 Class Series 2 Programmer’s Manual
STX v Request Firmware Version
This command causes the printer to send its version string (same as printed on the
configuration label). The version may be different from printer to printer.
Syntax:
<STX>v
Printer Response:
VER: H-4212–11.04 01/01/2008<CR>
STX W Request Memory Module Information
This command requests a memory module directory listing. Results may vary depending
on printer class, model, or firmware version.
Syntax:
<STX>W[b][c]a
Where:
b s
optional – list file size also
c e
optional – list file extension also
a -
Data type:
F
G
L
C
X
N
M
f
p
*
=
=
=
=
=
=
=
=
=
=
Downloaded fonts
Graphics (Image)
Label formats
Configuration files
Menu language files
Plug-ins
Miscellaneous type files
Resident fonts
Entire module contents
All types
Sample:
<STX>WF
Printer response
(using an H-Class):
MODULE: D<CR>
S50 92244ttf50<CR>
AVAILABLE BYTES: 945152<CR>
MODULE: G<CR>
AVAILABLE BYTES: 852480<CR>
MODULE: X<CR>
AVAILABLE BYTES: 852480<CR>
MODULE: Y<CR>
AVAILABLE BYTES: 852480<CR>

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz