Overview
Class Series 2 Programmer’s Manual 3
General Conventions
These are some of the conventions followed in this manual:
On the header of each page, the name of the section.
On the footer of each page, the page number and the title of the manual.
Names of other manuals referenced are in Italics.
Notes are added to bring your attention to important considerations, tips or helpful
suggestions.
Boldface is also used to bring your attention to important information.
This manual refers to IBM-PC based keyboard command characters for access to the
ASCII character set. Systems based on different formats (e.g., Apple’s Macintosh )
should use the appropriate keyboard command to access the desired ASCII
character. See Appendix A for the ASCII character set.
Computer Entry and Display Conventions
Command syntax and samples are formatted as follows:
The Courier font in boldface indicates the DPL command syntax, and Italics are
used to indicate the command syntax parameters.
Regular Courier font indicates sample commands, files and printer responses.
Square brackets ([ ]) indicate that the item is optional.
<CR> is used to identify the line termination character. Other strings placed
between < > in this manual represent the character of the same ASCII name, and
are single-byte hexadecimal values (e.g., <STX>, <CR>, and <0x0D> equal 02, 0D,
and 0D, respectively).
Hexadecimal values are often displayed in “C” programming language conventions
(e.g., 0x02 = 02 hex, 0x41 = 41 hex, etc.)
Important Safety Instructions
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance instructions.
To Next Page
Loading...
Need help?
General
