Datamax E-Class Mark II Programmer's Manual

Appendix K –Maximum Row, Column, & Character Values; Print Resolutions & Widths; and, Module Identifiers & Allocations
272 Class Series 2 Programmer’s Manual
Memory Module Identifiers and Allocations
Printer
Module ID
Description
E-Class
Mark III
(Basic &Adv)
E-Class
Mark III
(Pro)
A-Class
MP Compact
Mark II
EX2
E-Class &
Mark II
I-Class
H-Class
M-4206
Mark II
M-4210 &
4308
Mark II
A DRAM (512 KB - default size) X X
B
[1]
Flash (512 KB available to user) X X
C
Default, as assigned by <STX>X
X
X
X X X X X X
DRAM (512 KB - default size), configurable. X X
[6]
D
DRAM (default 1MB), configurable.
X X
X
X
X X X X
SDIO X
[8]
X
F
4 MB Flash option (as equipped)
[4]
X
256 KB Flash, Main CCA
[2]
X X
512 KB Flash, Main CCA, configurable up to 6.5 MB with Flash option
[3, 4]
X
≈ 1.0 MB Flash, Main CCA
[4, 5]
X
X X
≈ 4.0 MB Flash, Main CCA
[4, 5]
X
[7]
X
[7]
X X
[7]
X
G
48 MB, Main CCA
H USB Host Ports (as equipped)
X
X
[8]
X X
I USB Host Ports (as equipped) X
[8]
X X
J 64 MB option (as equipped) X
X ILPC Module, configurable 256 KB to 4 MB (as equipped).
X
[5]
X
[5]
X
[3,4]
X
[5]
X
[5]
X
[5]
X
[5]
X
[5]
64 KB Flash – Menu / EFIGS – protected X
Y
128 KB Flash – Menu / EFIGS – protected
X
[5]
X
[5]
X
X
[5]
X
[5]
X
[5]
X
[5]
X
[5]
X
[5]
Z
[4]
4 MB Flash – Option ILPC – protected X
[1]
≈100,000 writes for semi-or-permanent data storage, dependent upon options and available memory; see the configuration label or <STX>KC.
[2]
Not available for the I-4206 and I-4208.
[3]
Modules G and X are partitioned to equal the sum of the total space available.
[4]
Configurable; see <STX>KcMCC.
[5]
Modules X and Y are factory allocated and locked; memory is shared with Module G.
[6]
Reduced to 128KB when MCL equipped.
[7]
Size dependant on main board flash and options installed, up to 4MB.
[8]
Optional for A-Class Mark II models only.
Table K-4: Memory Module Identifiers and Default Memory Allocations

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz