Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
114 Class Series 2 Programmer’s Manual
STX KR Reset Memory Configuration
This command resets the printer’s DRAM configuration to the default settings; see
<STX>KM.
Syntax:
<STX>KR<CR>

This command will result in a system reset for the EX2.
STX Kr Resettable Counter Reset
This command resets the internal counters. Follow this command with an <SOH>U
command to retain the reset or the counters will revert to the previous values after
cycling power.
Syntax:
<STX>Kr<CR>
STX KS Memory Configuration, Scalable Font Cache
(Non-Display Models only)
See the <STX>K command.

This command will result in a system reset for the EX2.

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz