Datamax E-Class Mark II Programmer's Manual

Class Series 2 Programmer’s Manual 275
Appendix M
Commands by Function
Commands by Function
Function Command
Backup speed
pa
Batch quantity request
<SOH>E
Cancel
<SOH>C
Character bitmapped data
<ESC>(snnnWdata
Character code
<ESC>*cnnnE
Character dump mode
<STX>P
Column offset amount
Cnnnn
Configuration label and dot pattern print
<STX>Z
Configuration Set (See Table 5-1 for individual listings)
<STX>Kc
Continuous paper length
<STX>cnnnn
Count by
^nn
Cut
<STX>o
Cut by
:nnnn
Cut by
cnn
Decrement alphanumerically
<fii
Decrement numerically
- fii
DIP switch, host controlled settings
<STX>Vn
Dot size height and width
Dwh
Edge sensor enable
<STX>e
Feed rate
<STX>Sa
Feedback characters enable
<STX>a
Field data line terminator
Tnn
File delete from module
<STX>xmfname
Firmware version request
<STX>v
Font descriptor
<ESC>)snnnW
Font ID number
<ESC>*cnnnD
Form feed
<STX>F
Set Present Distance
<STX>Kfnnnn
Format attribute
An
Graphics image download
<STX>Iabfname
c
r
Heat setting
Hnn
Inches
<STX>n
Increment alphanumerically
>fii
Increment numerically
+fii
Label format field replacement
<STX>Unnstring
Label formatting start
<STX>L
Label length maximum
<STX>Mnnnn
(continued)

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz