Datamax E-Class Mark II Programmer's Manual

Label Formatting Command Functions
Class Series 2 Programmer’s Manual 135
r Recall Stored Label Format
This command is used to retrieve label formats stored on a memory module. Embedding
recalled labels, up to 6 levels of nesting, within a recall label is also possible.
Syntax:
rnn...n
Where:
nn…n
-
Is a label name, up to 16 characters in length.
The samples below explain different ways to recall and print a label
format. (Use <STX>W to view a memory module’s directory.)
String Sent: Printer Interpretation:
Sample 1:
<STX>L<CR>
rTEST<CR>
Q0002<CR>
E<CR>
Begin label format
Retrieve format named TEST
Quantity requested = 2
Terminate formatting and print
Sample 2:
<STX>L<CR>
rTEST<CR>
X<CR>
<STX>G<CR>
Begin label format
Retrieve format named test
Terminate formatting
Print
Sample 3:
<STX>L<CR>
D11<CR>
PO<CR>
SO<CR>
rTEST<CR>
E<CR>
Begin label format
Dot size = 1x1
Print speed O
Feed speed O
Retrieve format named test
Terminate formatting and print
The sample below explains recall embedding.
String Sent: Printer Interpretation:
Sample:
<STX>L
rLABEL1
191111111111LABEL1FIELD1
sGLabel1
Store label 1
<STX>L
rLABEL1
191111111111LABEL2FIELD1
sGLabel2
Store label 2
<STX>L
rLabel2
19111111111LABEL3FIELD1
E
Print label 3
What gets printed:
LABEL1 FIELD1
LABEL2 FIELD1
LABEL3 FIELD1

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz