Datamax E-Class Mark II - STX Kq Query Memory Configuration

Extended System-Level Command Functions
Class Series 2 Programmer’s Manual 113
STX Kq Query Memory Configuration
This command causes the printer to transmit its internal DRAM memory configuration to
the host device. The transmitted data provides information regarding the total amount
of internal DRAM installed, the amount available for configuration, and the amount
currently assigned to specific functions or entities.
Syntax:
<STX>Kq<CR>
Response format:
Memory Configuration<CR>
Product: aaaacdd.ee mm/dd/yy<CR>
Installed RAM: iiiiMB<CR>
Label Width: vvvvoo<CR>
Print Buffer Size: :xxxxoo<CR>
Allocation RAM: ssssKB<CR>
Internal Files LLLLKB<CR>
Font Cache wwww:KB<CR>
<CR>
-
ASCII Carriage Return (0x0D) record
delimiter.
aaaacdd.ee mm/dd/yy
-
ASCII string sequence that represents the
firmware version number string.
iiii
-
The number of megabytes of installed
internal DRAM memory.
vvvv
-
The length of the Label Width.
xxxx
-
The length of the Print Buffer.
ssss
-
The number of kilobytes of internal
memory assigned to the label Print Buffer.
LLLL
-
The number of kilobytes assigned to the
internal memory module.
wwww
-
The number of kilobytes assigned to the
Scalable Cache.
Where:
oo
-
Current label dimension unit’s
designation. “IN” for inches and “MM” for
millimeters.