Datamax E-Class Mark II Programmer's Manual

Extended System-Level Command Functions
112 Class Series 2 Programmer’s Manual
Display-Equipped
model response
format:
Product: I4208 – 01.01 05/21/1999
Installed RAM: 8 MB
Label Width: 4.09 IN
Print Buffer Size: 272 IN
Allocation RAM: 6389 KB
Internal Files: 512 KB
Font Cache: 232 KB
Where:
Product
-
Printer model, type, and firmware version.
Installed RAM
-
Total amount of RAM.
Label Width
-
Size in inches/millimeters of the print
head.
Print Buffer Size
-
T
otal number of inches/millimeters of Print
Dot Buffers available. (This is not the
maximum size of a label, which is limited
to 99.99 inches.)
Allocation RAM
-
Amount of RAM that can be configured for
the Internal Files, Font Cache and the
remainder going to the Print Buffer Size.
Internal Files
-
Size of the Internal Module used to store
downloaded fonts, graphics and label
formats.
Font Cache
-
Size of the Font Buffer used to temporarily
store characters. Increasing this buffer
will increase performance if labels have a
large variety of font sizes and characters.

Datamax E-Class Mark II Specifications

General

Resolution	203 dpi (8 dots/mm) or 300 dpi (12 dots/mm)
Operating Temperature	40°F to 95°F (4°C to 35°C)
Storage Temperature	-40°F to 140°F (-40°C to 60°C)
Print Method	Direct Thermal / Thermal Transfer
Max Print Speed	6 inches per second (ips)
Memory	8 MB DRAM
Interface	Serial, Parallel, USB
Media Type	Labels, Tags, Receipts
Media Width	0.75" (19 mm) to 4.65" (118 mm)
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Power Requirements	100-240 VAC, 50-60 Hz