Dell EMC DSS8440 - Installing the PSB Power Interposer Board

Installing the PSB power interposer board
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Connect all cables to the PSB power interposer board
Steps
1 Install the PSB power interposer board to the system.
2 Tighten the four screws to secure the PSB power interposer board to the system.
Figure 68. Installing the PSB power interposer board
Next steps
1 Install the system board tray module.
2 Install the Air shroud
3 Installing a PCIe switch board
4 System cover
5 Follow the procedure that is listed in After working inside your system.
86
Installing and removing system components