Dell Command Line Interface User Manual

78 omconfig: Managing Components Using the Instrumentation Service
config=nic
(continued)
vlanenable=true | false true: Enables the virtual LAN identification.
false: Disables the virtual LAN identification.
vlanid=number number: Virtual LAN identification in the
range of 1 to 4094.
vlanpriority=number number: Priority of virtual LAN identification
in the range of 0 to 7.
config=serial baudrate=9600 | 19200 | 38400 | 57600
| 115200
9600: Sets connection speed to 9600 bits
per second.
19200:Sets connection speed to 19200 bits
per second.
38400: Sets the volatile and nonvolatile
connection speed to 38400 bits per second.
57600: Sets the volatile and nonvolatile
connection speed to 57600 bits per second.
115200: Sets the volatile and nonvolatile
connection speed to 115200 bits per second.
NOTE: Baud rates of 9600 and 19200 are
supported on PowerEdge 1800, 1850, 2800, and
2850 systems.
Baud rates of 9600, 19200, 38400, and 57600 are
supported on PowerEdge x9xx systems.
Baud rate of 115200 is supported on certain
systems that have a DRAC 5 installed.
flowcontrol=none | rtscts none: No control over the flow of
communication through the serial port.
rtscts: RTS is ready to send and CTS is clear
to send.
Table 4-12. omconfig chassis remoteaccess (continued)
name=value pair 1
config=
name=value pair 2 Description

Dell Command Line Interface Specifications

General

Brand	Dell
Model	Command Line Interface
Category	Network Card
Language	English