Figure 20. Sled Installation Guidelines
Installing a sled
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Release the sled handle by pressing the blue latch to disengage it from the metal hook.
2. Pull the handle until it rotates to the end of its travel.
3. Holding the sled with both hands, align the sled with the sled-bay in the enclosure.
NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
26 Installing and removing system components
To Next Page
Loading...
