Figure 40. Removing the 40 mm fan cage holder
Next steps
1. Installing the 40 mm fan cage holder.
Installing the 40 mm fan cage holder
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedures listed in Before working inside your system.
3. Remove the 40 mm fan cage.
Steps
1. Align the fan cage holder with the two guided pins. Lower down the cage holder on to the guided pins.
2. Using a Phillips #1 screwdriver, tighten the screw to secure the cage holder in place.
44
Installing and removing system components
To Next Page
Loading...
