Dell PowerEdge C6600 - Removing a 60 mm Cooling Fan

Figure 35. Installing the 60 mm cooling fan cage
Next steps
1. Install the system coverInstall the mid top cover.
2. Install the mid top coverInstall the system cover.
3. Follow the procedure listed in After working inside your system.
4. Check the management software to see if all the fans are rotating at the optimal speed.
Removing a 60 mm cooling fan
Prerequisites
WARNING: Do not attempt to operate the system without the cooling fans.
WARNING: The cooling fan spins for some time after the system is powered off. Allow the fan to stop spinning
before removing it from the system.
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the 60 mm cooling fan cage.
Steps
Lift the cooling fan upward away from the cooling fan cage.
Installing and removing system components
39