Figure 31. Installing a 80 mm fan
Next steps
1. Follow the procedure listed in After working inside your system.
2. Check the management software to see if the fan is rotating at the optimal speed.
Removing the diskless 80 mm fan cage
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
Steps
1. Using the Phillips 1 screwdriver, remove the screws securing the fan cage to the chassis.
2. Slide the fan cage to the front of the system and lift the fan cage from the chassis.
Installing and removing system components
35
To Next Page
Loading...
