Figure 39. Installing the 40 mm fan cage
Next steps
1. Install the system cover.
2. Follow the procedure listed in After working inside your system.
3. Check the management software to see if all the fans are rotating at the optimal speed.
Removing the 40 mm fan cage holder
Prerequisites
1. Follow the safety guidelines listed in Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Remove the 40 mm fan cage.
Steps
1. Using the Phillips 1 screwdriver, remove the screw that secures the cage holder.
2. Lift up the cage holder to remove it from the chassis.
Installing and removing system components
43
To Next Page
Loading...
