Figure 66. Installing the right control panel assembly
Next steps
1. Reconnect the right control panel cable to the midplane.
2. Install the diskless 80 mm fan cage.
3. Install all 80 mm fans.
4. Install the mid top cover.
5. Follow the procedure listed in After working inside your system.
Drives
Removing a drive blank
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
CAUTION: To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
66
Installing and removing system components
To Next Page
Loading...
