Dell PowerEdge C6600 - PowerEdge C6600 System Overview

PowerEdge C6600 system overview
The PowerEdge C6600 system is a ultra-dense 2U enclosure that can support up to four independent two-socket (2S) C6620
sleds and supports:
● Two redundant AC or DC power supply units
●
Up to 16 x 2.5-inch SAS/SATA/NVMe (HDD/SSD) drives
● Up to 8 x E3.s NVMe SSD drives
● Diskless configuration
NOTE: For more information about how to hot swap NVMe PCIe SSD U.2 device, see the Dell Express Flash NVMe
PCIe SSD User's Guide at https://www.dell.com/support > Browse all Products > Data Center Infrastructure >
Storage Adapters & Controllers > Dell PowerEdge Express Flash NVMe PCIe SSD > Documentation > Manuals
and Documents.
NOTE: All instances of SAS, SATA drives are referred to as drives in this document, unless specified otherwise.
Topics:
• Front view of the system
• Rear view of the system
• Inside the system
• Power supply unit indicator codes
• Drive indicator codes
• Locating the Express Service Code and Service Tag
• System information label
Front view of the system
Figure 1. Front view of diskless system
2
PowerEdge C6600 system overview 7