CAUTION: Before attempting to remove or install a drive while the system is running, see the documentation
for the storage controller card to ensure that the host adapter is configured correctly to support drive
removal and insertion.
CAUTION: To prevent data loss, ensure that your operating system supports drive installation. For more
information about the drives installation or uninstallation requirements, see the operating system's user
guide.
Steps
1. Press the release button to open the drive carrier release handle.
2. Holding the drive carrier release handle, slide the drive carrier out of the drive slot.
Figure 73. Removing a drive carrier
Next steps
1. Install a drive carrier or drive blank.
Removing the E3.s drive carrier
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
Steps
1. Push the release button upwards to pop out the release handle.
2. Holding the drive carrier release handle, slide the drive carrier out of the drive slot.
70
Installing and removing system components
To Next Page
Loading...
