Dell S6000 - Show Userroles

Dell#show role mode configure management crypto-policy
Role access: secadmin, sysadmin
Related
Commands
userrole, username, privilege
show userroles
Display information on all defined user roles.
Syntax
show userroles
Example
Dell#show userroles
Role Inheritance Modes
netoperator Exec
netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
secadmin Exec Config
sysadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
netoperator
testadmin netadmin Exec Config Interface Line Router IP
Route-map Protocol MAC
Command
Modes
EXEC Privilege
Command
History
Version 9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, MXL.
Related
Commands
userrole, username
userrole
Create user roles for the role-based security model.
Syntax
userrole name inherit existing-role-name
To delete a role name, use the no userrole name command. Note that the reserved
role names may not be deleted.
Parameters
name Enter a text string for the name of the user up to 63
characters. It cannot be one of the system defined roles
(sysadmin, secadmin, netadmin, netoperator).
inherit existing-
role-name
Enter the inherit keyword then specify the system defined
role to inherit permissions from (sysadmin, secadmin,
netadmin, netoperator).
Security
1311