Dell S6000 - Fail-Mode

Command
Modes
EXEC Privilege
Command
History
Version 9.4(0.0) Introduced on the S6000.
fail-mode
Configures failure-mode on the platform.
S6000
Syntax
fail-mode secure
To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters
secure Enter the keyword secure to delete all its database and
hardware flows/resources, when the VTEP loses connectivity
with the controller.
Defaults non secure
Command
Modes
VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version 9.4.
(0.0)
Introduced on the S6000.
Usage
Information
Related
Commands
vxlan-instance— Enable VXLAN Instance configuration on the platform.
vxlan-instance
Enable VXLAN Instance configuration on the platform.
S6000
Syntax
vxlan-instance instance ID
To enable the vxlan-instance command, use the [no] shut command.
1482
Virtual Extensible LAN (VXLAN)