Dell S6000 - Show Ip Fib Stack-Unit

Field Description
Prefix Length Displays the prefix-length or mask for the IP address
configured on the linecard 0 port pipe 0.
Current Use Displays the number of routes currently configured for the
corresponding prefix or mask on the linecard 0 port pipe 0.
Initial Size Displays the CAM size Dell Networking OS allocates for the
corresponding mask. Dell Networking OS adjusts the CAM
size if the number of routes for the mask exceeds the initial
allocation.
Example
(ECMP-Group)
Dell#show ip cam stack-unit 0 po 0 ecmp-group detail
Destination EC CG V C VId Mac-Addr Port ECMP Group-Index
----------------- -- -- - ----- ---------------- -------------
1.1.1.2 0 0 1 0 0 00:01:e8:8a:d6:58 0004 Te 0/3 -
2.1.1.2 0 0 1 0 0 00:01:e8:8a:d6:58 0009 Te 0/8 -
1.1.1.1 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
2.1.1.1 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
1.1.1.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
2.1.1.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
100.1.1. 0 1 0 1 0 0 00:01:e8:8a:d6:58 0004 Te 0/3 0
100.1.1. 0 1 0 1 0 0 00:01:e8:8a:d6:58 0009 Te 0/8 0
0.0.0.0 0 0 1 1 0 00:00:00:00:00:00 3f01 CP -
Dell#
Example
(Member-Info)
Dell#show ip cam stack-unit 0 po 0 ecmp-group member-info
detail
Group Index Member Count Mac-Addr Port VLan ID Gateway
----------- ------------------------------- ------------------
0 2 00:01:e8:8a:d6:58 Te 0/3
0 1.1.1.2
00:01:e8:8a:d6:58 Te 0/8 0 2.1.1.2
Dell#
show ip fib stack-unit
View all FIB entries.
S6000
Syntax
show ip fib stack-unit id [ip-address [mask] [longer-prefixes]
| summary]
Parameters
id Enter the S-Series stack unit ID. The unit ID range is from 0
to 7 for the S6000.
ip-address
mask
(OPTIONAL) Enter the IP address of the network destination
to view only information on that destination. Enter the IP
address in dotted decimal format (A.B.C.D). Enter the mask in
slash prefix format (/X).
752
IPv4 Routing