Dell S6000 - Show Vlt Mismatch

show vlt mismatch
Display mismatches in VLT parameters.
S6000
Syntax
show vlt mismatch
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
Example
Dell#show vlt mismatch
Domain
-----------
Parameters Local Peer
------------ ----------- ---------
Unit-ID 0 15
Vlan-config
------------
Vlan-ID Local Mode Peer Mode
--------- ------------ -----------
100 -- L3
Vlan IPV4 Multicast Status
--------------------------
Vlan-ID Local Status Peer Status
-------- ------------ -----------
4094 Active Inactive
Dell#
Virtual Link Trunking (VLT)
1473