Dell S6000 - Vxlan-Instance (VAP)

To delete vxlan-instance from the system, use no vxlan-instance 1
command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the
instance ID 1 in the initial release.
Defaults Disabled
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version 9.4.
(0.0)
Introduced on the S6000.
Usage
Information
You must configure VXLAN globally before using VXLAN-instance.
Related
Commands
feature vxlan—Enable VXLAN configuration globally on the platform.
vxlan-instance (VAP)
To configure a VXLAN-Access Port (VAP) in to VXLAN-instance
S6000
Syntax
vxlan-instance instance ID
To unconfigure VAP, use the no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the
instance ID 1 in the initial release.
Defaults Disabled
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version 9.4.
(0.0)
Introduced on the S6000.
Virtual Extensible LAN (VXLAN)
1483